Finally got around to performing full blown test on the pool. Below are my results, I am hoping you guys can point me in the right direction. My water since day one has been clear, not sure I would say it has that perfect sparkle as many of you guys rave about but it has not been cloudy either, just dont want to loose what I have and only want to make it better!!!
Results:
Sodium Chloride - 3000 ppm
FC 1.5ppm
CC - added 5 drops and it remained clear?? Does this mean no Combined Chloring this has me confused?
CH - 100ppm
TA - 90 ppm
CYA less than 10 - I did add 4 lbs of CYA yesterday using the pantyhose method in front of the skimmer with the pump running 24 hours per day
PH- 8.0 My PH has always been on the high side since day one shouldnt I be trying to lower it some?
17,500 Gallon Fibergalss, 4 Deck Jets that run when we are in the pool, Jandy 2HP Var. Speed Pump, Jandy Cartridge Filter and Jany JXI Heater. Has a Hayward AquaRite 40K Salt System set on about 35% running 12 hours during the day.
Any advice
thanks
Results:
Sodium Chloride - 3000 ppm
FC 1.5ppm
CC - added 5 drops and it remained clear?? Does this mean no Combined Chloring this has me confused?
CH - 100ppm
TA - 90 ppm
CYA less than 10 - I did add 4 lbs of CYA yesterday using the pantyhose method in front of the skimmer with the pump running 24 hours per day
PH- 8.0 My PH has always been on the high side since day one shouldnt I be trying to lower it some?
17,500 Gallon Fibergalss, 4 Deck Jets that run when we are in the pool, Jandy 2HP Var. Speed Pump, Jandy Cartridge Filter and Jany JXI Heater. Has a Hayward AquaRite 40K Salt System set on about 35% running 12 hours during the day.
Any advice
thanks