Finding the right program for a variable speed pump.

[miles267]

Thank you very much for sharing. Will need to tweak the Winter schedule since I'm in AR and not AZ [emoji3]

 

[miles267]

PB set our new equipment pad today. Appears they've upgraded us from Pentair IntelliFlo 011018 to the newer IntelliFlo 2 VST likely based on part availability.

Sent from my iPhone using Tapatalk

 

[labajan]

I would like to set up different flow rate settings like you. How can i do that with screen logic or in my intellitouch? Thanks

Summer Pump Run Schedule


RPM Wattage Purpose Start Stop Total min flow

S-1 1,000 100 Extra Filtration 4 pm 10 pm 6 —

S-2 1,600 300 Chlorinate 8:30am 4 pm 8 20

S-3 2,800 1,300 Cleaning 7 am 8:30am 1.5 50

S-4 3,100 1600 ——— unused——————————————————————-

External Program

E-2 2,550 950 Solar Controller On Demand 40 gpm



Quick Clean

3,000 1,500 Manual Clean 1.5 hr. duration 70 gpm

 

[sktn77a]

Interesting. As an aside, it appears that these new variable speed pumps are only more efficient at lower speeds. At 2800 and 3100, they are consuming 1300 and 1600 watts. That's about as much as a 1HP PSC pump, isn't it?

 

[Jimrahbe]

I would like to set up different flow rate settings like you. How can i do that with screen logic or in my intellitouch? Thanks

With ScreenLogic you need to set up two things.. Speed for each circuit or feature.. See below..

And you will need a schedule to turn on each circuit or feature as wanted.. See below..

If you are trying to do this from your phone, I would advise using your PC.. But if you must use your phone, you will need the ScreenLogic Configuration app..

Thanks,

Jim R.