Seems like every 5-7 days my PH is going above 8.0,, the red is at or above the highest red mark on my TF-100 ph test tube.
I add the appropriate amount of muratic acid (according to pool school),, check it the next day and its down around 7.2-7.4. I have 3 returns that I had pointed a bit high, and I adjusted those a few weeks ago so there is no more bubbling at the return outlet, just a bit of a swirl at the top of the water line.
I do have an overpowered 1.5hp pump, that I was hoping to not have to replace. I might just have too much water going through the returns? If I lean up against the returns, its pretty powerful.
I just checked my ph and its 8.0+ plus again. I can control my returns via jandy valve, should I turn them down or do you think something else is at issue here?
My chlorine, cya and other readings are all within check,, just the PH keeps going up.
I add the appropriate amount of muratic acid (according to pool school),, check it the next day and its down around 7.2-7.4. I have 3 returns that I had pointed a bit high, and I adjusted those a few weeks ago so there is no more bubbling at the return outlet, just a bit of a swirl at the top of the water line.
I do have an overpowered 1.5hp pump, that I was hoping to not have to replace. I might just have too much water going through the returns? If I lean up against the returns, its pretty powerful.
I just checked my ph and its 8.0+ plus again. I can control my returns via jandy valve, should I turn them down or do you think something else is at issue here?
My chlorine, cya and other readings are all within check,, just the PH keeps going up.