I'll be draining my pool next week for tile cleaning and also due to "off the chart CYA". I'll have a few days to kill before I get started and was wondering if I could start the CYA dissolving process in a 5 gallon bucket 3-4 days before I'll be refilling the pool? Has anyone tried this with any success?
Fast way to dissolve CYA Conditioner ?
- Thread starter JM7
- Start date
- May 3, 2014
- 61,604
- Pool Size
- 6000
- Surface
- Fiberglass
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-40
No need. Put it in a sock and drop in the skimmer basket with pump running. After an hour or so go out and squeeze it out.
I used a Rubbermaid storage tub knowing the 20lbs I needed in my new pool would take forever to dissolve in the cool water. After a couple days it did not noticeably dissolve and was as hard as cement.
It needs the running water from the return to help.
Attempt 2 was using a Tshirt instead of many socks and that worked great, it just took a day with cool water. There's no rush for the first day besides our impatience.
It needs the running water from the return to help.
Attempt 2 was using a Tshirt instead of many socks and that worked great, it just took a day with cool water. There's no rush for the first day besides our impatience.
Pre-dissolve CYA in a bucket?
I need to add CYA to my pool to get it ready for spring/summer. I've seen many posts about the sock method and sure it works just fine, but my family thinks I'm weird enough without me trying to explain why I've tied a sock to my brush pole and go outside to squeeze it every so often. Is...
www.troublefreepool.com
You can get Instant Conditioner, which is Sodium cyanurate, but it is much more expensive.
naturalchemistry.com
Instant Conditioner - Natural Chemistry
naturalchemistry.com