Hi. I believe this is my first post, so much information here. OK so here is what im doing. I just bought a Raypak 50000 btu heat pump for my 15' above ground pool. I would like to know some of the electrical components i need to buy. I wont be hooking this up myself, that job goes to my neighbour who is an electrician. Just to simplify things...
50000 btu raypak heat pump model 2350
208/230VAC
Minium circuit ampacity 23 amps
Maximum Breaker Size 35 Amps
The heater will be about 60' from the panel. From what i understand i need 8/3 wire and 30amp gfci breaker. Do i need a disconnect next to the heater or can i just run it from the panel? Do i bond the pool to the ground?
Thanks so much for your help.
50000 btu raypak heat pump model 2350
208/230VAC
Minium circuit ampacity 23 amps
Maximum Breaker Size 35 Amps
The heater will be about 60' from the panel. From what i understand i need 8/3 wire and 30amp gfci breaker. Do i need a disconnect next to the heater or can i just run it from the panel? Do i bond the pool to the ground?
Thanks so much for your help.