Hi everyone, I’ve gotten a ton of value from this forum so I wanted to give a little something back. I didn’t see an example of this on the forum during my research so I hope this can help someone else.
Goal: Create a smart timer for a 2 speed pool pump.
Short answer: follow the great diagram on http://waterheatertimer.org/How-to-wire-2-speed-pump.html.
List of parts I used:
Schneider Electric/Magnecraft 199AX-14 Relay
Packard C240B Contactor 2 Pole 40 Amps 120 Coil Voltage
GE Z-Wave Toggle Switch (1 switch for on/off; 1 switch for high/low)
Altelix 14x11x5 Weatherproof Enclosure
My first step was to replace the old Hayward Super II Pump that broke with a new Nidec US Motors 2speed pump. Buying this pump from a local industrial motor shop saved me hundreds of dollars compared to the pool stores or online pool motor suppliers. With basic online instructions, it was a straightforward replacement. Note: I considered a Variable Speed pump but I decided I could save so much up front cost on a 2 speed pump that it would take too long to make up the higher cost of the variable speed pump in the small incremental savings from higher efficiency (Source)
My second step was to create a smart timer that would replace my broken Intermatic PF1222T. I spent far too long researching online even though I found waterheatertimer.org’s diagram early in my research. Eventually I purchased the parts, wired them up according to the diagram, and connected the whole thing to my pump. It worked on the first try! I couldn’t believe it. I thought for sure that there would be an electrical issue that would take me a long time to debug but it all worked and it has been working for over a month now. It is great to control my pool pump from my phone, through Samsung SmartThings hub, along with all my other smart home things. I’m no longer restricted to an on/off mechanical timer and I can program it to react to the weather (freeze, rain, etc).
I highly recommend this project to anyone that wants to have more control over your pump and higher efficiency but doesn’t want to pay the extremely high prices that the pool companies/brands charge for the same functional technology. Pictures attached. Let me know if you have any questions!
Goal: Create a smart timer for a 2 speed pool pump.
Short answer: follow the great diagram on http://waterheatertimer.org/How-to-wire-2-speed-pump.html.
List of parts I used:
Schneider Electric/Magnecraft 199AX-14 Relay
Packard C240B Contactor 2 Pole 40 Amps 120 Coil Voltage
GE Z-Wave Toggle Switch (1 switch for on/off; 1 switch for high/low)
Altelix 14x11x5 Weatherproof Enclosure
My first step was to replace the old Hayward Super II Pump that broke with a new Nidec US Motors 2speed pump. Buying this pump from a local industrial motor shop saved me hundreds of dollars compared to the pool stores or online pool motor suppliers. With basic online instructions, it was a straightforward replacement. Note: I considered a Variable Speed pump but I decided I could save so much up front cost on a 2 speed pump that it would take too long to make up the higher cost of the variable speed pump in the small incremental savings from higher efficiency (Source)
My second step was to create a smart timer that would replace my broken Intermatic PF1222T. I spent far too long researching online even though I found waterheatertimer.org’s diagram early in my research. Eventually I purchased the parts, wired them up according to the diagram, and connected the whole thing to my pump. It worked on the first try! I couldn’t believe it. I thought for sure that there would be an electrical issue that would take me a long time to debug but it all worked and it has been working for over a month now. It is great to control my pool pump from my phone, through Samsung SmartThings hub, along with all my other smart home things. I’m no longer restricted to an on/off mechanical timer and I can program it to react to the weather (freeze, rain, etc).
I highly recommend this project to anyone that wants to have more control over your pump and higher efficiency but doesn’t want to pay the extremely high prices that the pool companies/brands charge for the same functional technology. Pictures attached. Let me know if you have any questions!