Starting to run solar I had installed back in March on a daily basis and I wonder, how to dial in my VS Pump speed. Installers set it for 2,620 RPM and it's running fine, however, if possible I'd like to dial it down to just above where it needs to be (I'm assuming it's less than where they set it). Is there any way to gauge minimum speed on a case by case basis? I read something about bubbles; if you see bubbles increase speed. Any other methods?
I run my skimmers/floor drain at 1,150 btw and this give me nice action in the skimmers.
I run my skimmers/floor drain at 1,150 btw and this give me nice action in the skimmers.