Hi, I have a pentair sand filter with their 6-way valve on the top. It has an air bleeder in it and the o-ring is worn out on the air bleeder. Unfortunately the parts list in the manual does not have the o-ring size or a part number listed for it. The part number for the Air Bleeder is 273512. I am looking for how to determine the o-ring size. Please post any suggestions?
Determine o-ring size
- Thread starter Egreenwood
- Start date
If you have the oring in hand - go to Ace Hardware - they have a huge assortment of orings that you can match.
- Jul 21, 2013
- 52,686
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
Pentair/PacFab FNS O-Ring Bleeder For Filters (#273513)
Pentair/PacFab FNS O-Ring Bleeder For Filters (#273513)
Pentair/PacFab FNS O-Ring Bleeder For Filters (#273513)
www.poolpartsunlimited.com
- O-ring bleeder replacement
- Fits Pentair Nautilus and Nautilus Plus pool/spa D.E. filter models NS24, NS36, NS48, NS60, NS72, NSP-24, NSP-36, NSP-48, NSP-60, NSP-72
- Also fits Pentair FNS pool and spa D.E. filter models FNS 24, FNS 36, FNS 48, FNS 60
- Also compatible with Pentair Triton C, C-3, TR100C and TR140C pool/spa sand filters
- Measures 1/2-inch length by 1/2-inch height by 1/4-inch width
- Feb 6, 2015
- 6,125
- Pool Size
- 12300
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- CircuPool RJ-45 Plus
Take the air bleed assembly where the O-ring mounts and the old O-ring to your local hardware store.