@ Jongig - I am setting up Feature 7 to control the Aux Extra output and will put an egg timer of 1 hour on it. I can activate Feature 7 from the QuickTouch remote - that I have tested already. I also need to increase my pump speed in order to push the water up the slide. My pumping system is in on a slope behind the pool and is about 2 feet below high water line, which makes for very efficient filtration. When I need to pump to my solar panels or to the slide I have to increase pump speed from about 1000 RPM to about 1500 RPM in order to develop the head I need. If I am not mistaken, the actuator valves always have some voltage to them but when they hit their limit switch internally after moving the circuit to the motor is cut, so there won't be any voltage on the motor. My reason for the timer is the fact that I use about 100 watts to filter and over 300 to run the slide or solar, so this keeps my kids from turning on the slide at 10 AM for a half hour swim and leaving it on until I get home later! I do this with the pool lights and other things like my landscape lighting which is also controlled through the EasyTouch.