Just replacing my old cpsc24 with a new cpx36. Completed piping/cell installation. First question is : there is an air bubble in top of cell. I have good flow at the returns. I assume it is because all the piping got air while everything was disconnected. Second question: I am about to connect the module. I am wiring to timer. There is nothing in the instructions as to the module wires.
Compupool CPX 36 wiring
- Thread starter Dcook11
- Start date
- Jun 22, 2014
- 47,861
- Pool Size
- 17888
- Surface
- Fiberglass
- Chlorine
- Salt Water Generator
- SWG Type
- CircuPool RJ-45 Plus
Air should eventually get purged from the cell. Are you still seeing it in there?
As for the wiring, some pics of the module and timer might help.
Maybe this old thread will help.
www.troublefreepool.com
As for the wiring, some pics of the module and timer might help.
Maybe this old thread will help.
Compupool CPX-36 Install and Review
Hello All, I had a Compupool CPSC-48 that I've replaced with a CPX-36 unit. That's a whole another story, but here's my review of the CPX-36 and install. Overall the unit is easy to install with basic electrical and plumbing skills. The unit comes with 2 unions designed to fit 2 inch PVC...
www.troublefreepool.com