We live in a small town. Our pool store is closed on Sunday. The present measurements, taken a few moments ago, are:
Total Hardness: 250
Total Chlorine 3
Free Chlorine 3
PH 7.8
Total Alkalinity 180
Stabilize 50
I found something later that told me I should have first pre-dissolved the PH down in a bucket of water, which I did, and then poured that slowly in front of a return (which I didn't). Not sure if that is why the PH has remained the same. Thanks again. The pool is a little clearer.
Dr. Mary, Brooksville, FL
1) 3800 gals Intex pool, 16 x 42
2) Cartridge Filter 2500 gal. (Intex)
3) AG Pool
4) SWG
Total Hardness: 250
Total Chlorine 3
Free Chlorine 3
PH 7.8
Total Alkalinity 180
Stabilize 50
I found something later that told me I should have first pre-dissolved the PH down in a bucket of water, which I did, and then poured that slowly in front of a return (which I didn't). Not sure if that is why the PH has remained the same. Thanks again. The pool is a little clearer.
Dr. Mary, Brooksville, FL
1) 3800 gals Intex pool, 16 x 42
2) Cartridge Filter 2500 gal. (Intex)
3) AG Pool
4) SWG