This morning I tested my water and chlorine was down to 3.5 ppm. I have been targeting 7 ppm recently because of a slight algae problem I have had lately and so I added about 110 ounces of bleach to get to 7.0 per my Pool Pal app.. I took a water sample to Leslie just for several hours later just for the heck of it and they found the following [in terms of chlorine]
FAC 4.0
TAC 4.0
How could it be that I was at 3.5..added almost a gallon of bleach..and they came up with a reading of 4.0?? Is one of us way off???
My CYA is about 45 and pH is 7.6. Both my test and Leslie came up with the same numbers for those tests.
Sent from my Samsung Galaxy 10.1 using Tapatalk
FAC 4.0
TAC 4.0
How could it be that I was at 3.5..added almost a gallon of bleach..and they came up with a reading of 4.0?? Is one of us way off???
My CYA is about 45 and pH is 7.6. Both my test and Leslie came up with the same numbers for those tests.
Sent from my Samsung Galaxy 10.1 using Tapatalk