I've had my pool for a few months and really struggling with the Chlorine levels. I have the Jandy Aquapure SWG and it appears to be producing chlorine fine as I check water from the returns and there is plenty of chlorine showing in the test. All other test are in acceptable ranges.
TC - 1.0
CC- 0.0
PH - 7.4
TA - 90
CYA - 80
Right now I run my pump for 12 hours per day as the heat is here in Texas. The only way I can keep my Chlorine levels at 1.0 is to run the SWG at 100percent. That, I know, is not normal.
My neighbor has the same equipment, and keeps theirs at 65 percent and all is well.
One area I have not explored is shocking the pool. I know this has never been done. Not even on start up. Would shocking help stabilize my chlorine depletion? Any help would be appreciated. Thanks.
TC - 1.0
CC- 0.0
PH - 7.4
TA - 90
CYA - 80
Right now I run my pump for 12 hours per day as the heat is here in Texas. The only way I can keep my Chlorine levels at 1.0 is to run the SWG at 100percent. That, I know, is not normal.
My neighbor has the same equipment, and keeps theirs at 65 percent and all is well.
One area I have not explored is shocking the pool. I know this has never been done. Not even on start up. Would shocking help stabilize my chlorine depletion? Any help would be appreciated. Thanks.