I have a hayward aqua plus automation setup. Currently I have one intermatic actuator which is for my solar heater. Its connected to valve three and works great. Can i add another actuator? If so i dont see a spot to program it thanks
Can you connect two actuator valves to a hayward aquaplus
- Thread starter my06mustanggt
- Start date
Thanks I did that and couldn't figure it out. The manual says the aquaplus can control 4 actuators I just dont know how to connect and program it thanks
- Jul 21, 2013
- 53,827
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
What are you trying to do?
Page 8 in https://hayward-pool-assets.com/ass...ls/AquaPlusPL-PLUSSeriesInstallatonManual.pdf shows 3 actuators - POOL/SPA SUCTION, POOL/SPA RETURN, and VALVE3.
Do you have a pool and spa or pool only?
It would be helpful if you create your signature so we know the details of your pool and equipment.
Page 8 in https://hayward-pool-assets.com/ass...ls/AquaPlusPL-PLUSSeriesInstallatonManual.pdf shows 3 actuators - POOL/SPA SUCTION, POOL/SPA RETURN, and VALVE3.
Do you have a pool and spa or pool only?
It would be helpful if you create your signature so we know the details of your pool and equipment.
- Jul 21, 2013
- 53,827
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
Connect the actuator to one of the pool/spa sockets. When you change to spa mode you will turn the valve.