I feel I have made some headway on my algae problem. It dawned on me that during SLAM I was to backwash the filter, which I have not done. Today I did. While backwashing, I used the backwash to vacuum. When I turned the filter on, all this white stuff starting spewing into the pool. Not sure what it was, but I believe I like it. Not long after that, algae started floating to the top, and accumulated in the dead zone. It was thick, so I tried to remove as much as I good with a net. Soon the particles that were left dissipated. I guess they were sucked into the filter. Then that happened again this afternoon. Lots of floating algae accumulated in the dead zone, and I scoped as much as I could out. The water is still green but I don’t believe as green as it once was.