I have Dolphin Advantage, similar to E20, Dx3, etc.
After much searching and reading, I figured out how to set my Dolphin Advantage into Automation mode by hold down the Schedule button for 10+ seconds, then pressing Power On button, then unplugging.
Just one question, in order to make the robot go on the next time, do I have to first turn off the smart plug, then turn it back on.
Thanks,
Jeff
After much searching and reading, I figured out how to set my Dolphin Advantage into Automation mode by hold down the Schedule button for 10+ seconds, then pressing Power On button, then unplugging.
Just one question, in order to make the robot go on the next time, do I have to first turn off the smart plug, then turn it back on.
Thanks,
Jeff