Aqua logic SWG buttons on control panel do not work. Pool running and LCD with appropriate readings, but buttons will not turn off. on or scroll thru menus. Did have recent storm with flickering of electricity.
Aqua logic SWG buttons on control panel do not work
- Thread starter vsamme
- Start date
- May 3, 2007
- 16,968
- Pool Size
- 20000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Hayward Aqua Rite (T-15)
Welcome to the forum!
The AquaLogic doesn't have SWG buttons but it does have Menu buttons in the upper right. Is that what you are referencing?
Is this a remote or the control pad in the controller box?
I had a remote go bad once so it does happen. Have you tried power cycling the unit? If it is a remote, you may need to pull the battery.
The AquaLogic doesn't have SWG buttons but it does have Menu buttons in the upper right. Is that what you are referencing?
Is this a remote or the control pad in the controller box?
I had a remote go bad once so it does happen. Have you tried power cycling the unit? If it is a remote, you may need to pull the battery.
I'm referring to the menu buttons for filter, lights, aux 1, aux2, service, etc. My aqua logic control pad is different than the pic you posted. thank you
I did try turning off at breaker and back on briefly but no luck. I read to turn off for 10 min, but I'm afraid to try now as I may not be able to get it back on. Pool is on now.
- May 3, 2007
- 16,968
- Pool Size
- 20000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Hayward Aqua Rite (T-15)
10 seconds is sufficient to turn off the unit. Can you post a picture of your control pad?