Sometimes it just doesn't take.reloading the script seems to have done the trick. Was pretty sure I had that loaded previously but ??
Thanks much!It sounds like it could be that the controller is not recognizing the default key commands. When I read through the forum comments, I could not find a reference that they are different but I may missed it:
Hayward AquaLogic / ProLogic automation
Now that it spring here in the GWN, I’ve finally got Home Assistant talking to my Hayward AquaLogic pool controller: The AquaLogic interface code is here: https://github.com/swilson/aqualogic, and the Home Assistant code is here: https://github.com/swilson/home-assistant/tree/aqualogic...community.home-assistant.io
They don't seem to use different logic for either controller so something else might be going on.
The other possibility is that the timing in the controller could be different but again, no one has mentioned that in any of the other posts.
Are you are only trying the keys that are supported in the PS4? Only the Filter, Lights and first 2 Aux keys will work with the PS4 main relays.
If you feel comfortable with using the EW11 tools, I can step you through a process to capture some of the key strokes.
In the troubleshoot section in this document:
AQL-PS-8 & EW11 Setup Instructions
docs.google.com
It explains how to setup TCPUDPDbg to capture data from the controller. However, in this case, you would select "ShowHex".
View attachment 568422
First, use the main controller display to press a couple of key strokes. Capture and save the hex values into a separate file.
Next, use the app to do exactly the same order of key strokes. Again save hex values into a separate file.
Post both files letting me know which is which and maybe I can figure out what may be going on.
Thanks.
I have, and also exported the script and confirmed it is the same as the load.Did you try to reload the script?
sorry - I wasn't sure how to save them so I added a .txt. Is this better?The files you posted are not in hex mode.
Thanks, that gives me a direction to look into. If you find any info on the P4, please forward it to me.sorry - I wasn't sure how to save them so I added a .txt. Is this better?
Edit - I may have a P4 versus a PS4. I had only pulled the pcb board part number and know I only have 2 aux switches, but the control interface box does look like the p4 version. That might be my issue, seems I read it takes a few more characters or may not work at all
It may take until tomorrow to show up. It is currently under review and there could also be a rejection which would delay it further.Certainly happy to try whichever, at least for testing purposes. Currently, I get an error on the Windows Version link you posted, but will try again in a bit to see it is live.
Thanks for all the help!
Troubleshooting success again! I checked the P4 mode box in settings, and am getting the display text coming over. Turning on the filter on the local panel sends the signal that the pump is on, and the Filter button goes bold. I cannot seem to get the windows app to accept input either. Basically same response as my phone - iOS app.Try the windows store and search for the app.
I had the same issue with the link. Not sure why.