Long story short, I found this site a few weeks ago after fighting on-again, off-again green/cloudy pool water all summer long. I've read through the other threads that dealt with the same topic and thought I understood what needed to happen. I bought the Taylor K-2006 test kit with the Speed Stir, and have since had to order refills of the R-0870 and R-0871 off the TFTestkits website. I got my pH and CYA back in line and then started SLAM on September 22nd. Things were coming along great until about the 4th day. Since then my water has been stuck in a cloudy/slightly green state; I am having trouble seeing any further improvement. I started the SLAM process with the following values;
FC - 0
CC - 0
pH - 7.4
TA - 220
CH - 420
CYA - 60
I have only tested for FC the last 12 days, 2-3 times per day, at least before and after work, and usually right before bed. I am keeping FC at 24 ppm as shown on the Chlorine/ CYA chart. Any ideas on how I can get this cleared up? Here in my neck of the woods I'm running out of time before the weather starts to turn for the worse. I've attached a picture of the water. Thanks for the help.
FC - 0
CC - 0
pH - 7.4
TA - 220
CH - 420
CYA - 60
I have only tested for FC the last 12 days, 2-3 times per day, at least before and after work, and usually right before bed. I am keeping FC at 24 ppm as shown on the Chlorine/ CYA chart. Any ideas on how I can get this cleared up? Here in my neck of the woods I'm running out of time before the weather starts to turn for the worse. I've attached a picture of the water. Thanks for the help.