This is my first issue ever with the pools chemical balance and therefore my first SLAM. My instructions for the DPD read to use a 25ml sample and multiply by .2 which I did but then read further and saw the option of the 10ml sample with 0.5 multiplier! Oh well, live and learn. Guessing my first tests were very accurate at my expense!
My last test I used 10mls and will continue to do so.
PAGirl- thank you for that mention- I just shut it off. I don't see that mentioned in the SLAM protocol, which I'm trying to follow religiously right now. Hoping I didn't cause the SWG any harm. My salt reading is now on the low side likely due to us adding water yesterday after a partial drain for the tile work. Guessing I should wait until I get the SLAM done to add more salt.
My last test I used 10mls and will continue to do so.
PAGirl- thank you for that mention- I just shut it off. I don't see that mentioned in the SLAM protocol, which I'm trying to follow religiously right now. Hoping I didn't cause the SWG any harm. My salt reading is now on the low side likely due to us adding water yesterday after a partial drain for the tile work. Guessing I should wait until I get the SLAM done to add more salt.