I am trying to separate a motor from the pump housing to replace the motor. I can not get the a part. I have removed the coupler ring and there seem to be no screws holding them together.
I am trying to separate a motor from the pump housing to replace the motor. I can not get the a part. I have removed the coupler ring and there seem to be no screws holding them together.
Once you remove number 21, the locking ring, the motor and drive assembly should come out. Mind you it is probably a little stubborn because it has been installed for awhile. I would bleed the pressure in yours system to make it a little easier and then use a flathead screwdriver to pry it open. Don't go crazy with the screwdriver though, you may break the pump.
Hello , This thread has been inactive for over 60 days. New postings here are unlikely to be seen or responded to by other members. For better visibility, consider Starting A New Thread.
Welcome to TFP! For a wealth of pool care information please check out our free Pool School. If you are in need of specific help then we encourage you to Register and ask us here in the forum!