I have a friend with a 10k gallon AGP and a Compupool 16 SWG. What would be the suggested operating percentage and run time to start to dial it in? Texas pool with 70% full daily sun.
Water temp is also a good indicator. My water temp is in the mid 80s now and My FC is barely keeping up with the loss during the day. I'm running 80% for 8 hrs now and plan to increase my run time to 12 hrs for the time we're going to be away.
use poolmath http://www.troublefreepool.com/calc.html
enter voluum of pool in metric (38,000 litres)
at bottom of poolmath use effect of adding chemicals
choose chlorine gas and change quantity to 16g as you are dealing with a 16g cell
will give you 0.4ppm free chlorine per hour at 100%
i would start at 6 hours at 100% for 2.4ppm fc and adjust from there
Hello , This thread has been inactive for over 60 days. New postings here are unlikely to be seen or responded to by other members. For better visibility, consider Starting A New Thread.
Welcome to TFP! For a wealth of pool care information please check out our free Pool School. If you are in need of specific help then we encourage you to Register and ask us here in the forum!