Hi, I am currently pumping bleach with a Stenner 45M fixed 10 GPD pump with 15 gallon tank. I'd like to add another one to pump MA. Is there anything I need to consider changing in the specs of the pump for MA?
The bleach pump is controlled via my Pentair control panel but I'm out of circuits so will have to use a timer for the MA pump. Any recommendations for a timer? I'd like to be able to control the pump down to the minute.
I understand I'll need to dilute my MA to keep the fumes down. Any recommendations on the dilution ratio? The store I get my MA from has 31.45% MA.
I'm thinking that I'll only fill the tank up to about the 5 gal level so any splashing will stay in the tank.
If I dilute at 4 to 1 I assume I'd pour in 4 gallons of water and then 1 gallon of MA. Will the MA mix or sink to the bottom and then I'd have to use something to stir it with?
Do I have to make sure I am not injecting MA and bleach at the same time? The injectors will be about 2 inches from each other.
The bleach pump is controlled via my Pentair control panel but I'm out of circuits so will have to use a timer for the MA pump. Any recommendations for a timer? I'd like to be able to control the pump down to the minute.
I understand I'll need to dilute my MA to keep the fumes down. Any recommendations on the dilution ratio? The store I get my MA from has 31.45% MA.
I'm thinking that I'll only fill the tank up to about the 5 gal level so any splashing will stay in the tank.
If I dilute at 4 to 1 I assume I'd pour in 4 gallons of water and then 1 gallon of MA. Will the MA mix or sink to the bottom and then I'd have to use something to stir it with?
Do I have to make sure I am not injecting MA and bleach at the same time? The injectors will be about 2 inches from each other.