Become a TFP Supporter Pool Math Forum Rules Pool School
Results 1 to 3 of 3

Thread: Goldline Cell high Amps/Salt in reverse polarity mode only?

  1. Back To Top    #1

    Goldline Cell high Amps/Salt in reverse polarity mode only?

    The cell shuts down due to high amps/salt. Only happens in reverse polarity mode. Normal mode reads a salt level of 2900 and works fine???

  2. Back To Top    #2
    mas985's Avatar
    Join Date
    May 2007
    Location
    Pleasanton, CA
    Posts
    11,473

    Re: Goldline Cell high Amps/Salt in reverse polarity mode on

    The only thing I can think of is that there is short somewhere on the board relay that swaps the leads. The k-1 relay goes bad on a lot on Goldline units so it could be that.
    Mark
    Hydraulics 101; Pump Ed 101; Pump/Pool Spreadsheets; Pump Run Time Study; DIY Acid Dosing; DIY Cover Roller
    18'x36' 20k plaster, MaxFlo SP2303VSP, Aqualogic PS8 SWCG, 420 sq-ft Cartridge, Solar, 6 jet spa, 1 HP jet pump, 400k BTU NG Heater

  3. Back To Top    #3

    Re: Goldline Cell high Amps/Salt in reverse polarity mode on

    Thanks! I will research the k-1 relay.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •