I have a Pro Logic giving me low salt readings of 2200. Took a sample to the pool store and they said it was 3100 I am neww at this cleaned cell no help. any ideas thanks
At 4 years old it's close to the end of it's life. A typical sign that it's failing is it reading lower salt than is in the pool. I bet it's time to buy a new cell.
Denny, I have the same problem. I have the Goldline Aqua Logic system. My salt level is reading at 2400, when in reality it is at 3400. My salt cell is 7 years old. I removed the salt cell and had it tested and it is working correctly and is clean. I removed the main circuit board and checked both fuses and also signs of anything burnt on the back of the circuit board and it appears fine. The main circuit board was replaced approximately 3 years ago.
Hello , This thread has been inactive for over 60 days. New postings here are unlikely to be seen or responded to by other members. For better visibility, consider Starting A New Thread.
Welcome to TFP! For a wealth of pool care information please check out our free Pool School. If you are in need of specific help then we encourage you to Register and ask us here in the forum!