- Mar 4, 2011
- 313
- Pool Size
- 22600
- Surface
- Vinyl
- Chlorine
- Salt Water Generator
- SWG Type
- Hayward Aqua Rite (T-15)
I received my TF-100, Salt Strips, and Borate Strips in the mail today and am moving from the "Algae Topics". I just finished running all of my tests and the results are below. I have been adding bleach since Saturday to eliminate the algae and now the pool is blue and very cloudy (I can see about 6" below the surface). I will check the FC again first thing in the morning to see if it is holding.
My question is, now what should I do? Vacuum (I don't think there is a lot on the bottom from what I can tell brushing, but I cannot see down there), add salt, add other things to fine tune the numbers? Also, what numbers seem to be off for my setup? I have compared them to the suggested numbers in pool school and most seem to be in line. Thanks!
FC: 23
CC: 1.5
TC: 24.5
pH: 7.5
T/A: 70
CH: 280
CYA: 65
Borates: 50
Salt: 2070
Temp: 60
My question is, now what should I do? Vacuum (I don't think there is a lot on the bottom from what I can tell brushing, but I cannot see down there), add salt, add other things to fine tune the numbers? Also, what numbers seem to be off for my setup? I have compared them to the suggested numbers in pool school and most seem to be in line. Thanks!
FC: 23
CC: 1.5
TC: 24.5
pH: 7.5
T/A: 70
CH: 280
CYA: 65
Borates: 50
Salt: 2070
Temp: 60