PoolGuyNJ said:
OK, so now we know you have a fiber glass pool. How about telling us the length, width and depth. Then we can estimate the pool volume.
It will be a lot easier to see the crack with the pump off. The water's surface distorts the view and makes it hard to tell.
How old is the pool?
Scott
The length is 30 ft. The width I estimate is 13 ft. The depth is at one end 3 ft at the other end 5.5 ft. If these values are reasonable, the pool is 2145 cubic feet, correct?
The pool is about 10 years old.
A few more questions I ask. I'm still working on my signature.
I have a filter, it looks like this:
The pressure guage is usually around 18 psi. What does it mean for the pressure guage to be around 20 psi? What pressure psi is a problem? What does this mean and how can I fix it?
Can I tell the size of the pump and the size of my pool filter from this information? If not where can I find it?
The cracks look like:
The pool was filled a couple days ago and was last filled a couple weeks ago. How can I fix this?
I have a Hayward vacuum, you might be familiar with it:
As you know it is connected to:
This vacuum cleans one side of the pool and does not go to the other area.
How can this be fixed?
I think I can put the hose pictured in a hole on the other side. Is this hole the same as the hole in this picture?
What are solutions to this problem?
The sides get a little dirty above the water with debris that is kicked up. Should I be brushing this off daily or will it go away?
Thank you