New pool, got FC to 4 this am, didnt check CYA yet this am.
Tested TA & it's at 220! Should we worry? From what I;ve read on poolschool the TA shouldnt be adjusted unless the PH is a problem.
PH is somewhere between 7.8 but closer to 8.2 according to the Taylor Basic kit. Thinking of taking sample to Leslies for more accurate reading?
We realised that our water was lower than the inlet so we've added water since these readings. Will adding water change the PH at all?
Should we go ahead & lower the PH before we retest?
What are the problems with high PH?
Thanks in advance for all your help
Tested TA & it's at 220! Should we worry? From what I;ve read on poolschool the TA shouldnt be adjusted unless the PH is a problem.
PH is somewhere between 7.8 but closer to 8.2 according to the Taylor Basic kit. Thinking of taking sample to Leslies for more accurate reading?
We realised that our water was lower than the inlet so we've added water since these readings. Will adding water change the PH at all?
Should we go ahead & lower the PH before we retest?
What are the problems with high PH?
Thanks in advance for all your help