Help wife's pool has a french drain. Pulled liner to replace, water running in pool from cracks in deep end, can not get drain to pump any suggestions. I have tired every thing I know. thanks
Sounds like you are referring to main drain in the bottom of the pool. Is the pool mostly empty? The pump probably doesn't have enough suction to lift the water that high when the pool isn't full.
You have a pool with a liner. It has a bottom drain (dual drains?) (actually a suction port on the bottom of the pool). Correct? That is piped to the main pump.
And you have some other pipe that you call a french drain Under the pool?
And by french drain you mean a perforated pipe for collecting water and transporting it away? Is it under the pool or beside the pool?
When they built my pool they put in the same thing which is a gravel "sump" that has a 2" pipe running to it, if you want to drain the pool you can pump the water out from beneath the shell so it won't pop out. I have never tried to use it but I was told thats what its for. I think a true french drain uses gravity to drain.
You know you are right, I have read and i have a gravel sump not a french drain oh well what won't a pool builder tell you too get your money. Live and learn but you can not pump sump unless you have a vacuum pump or vac truck. oh well pool guy 1 owner 0.
My neighbor when I lived in WI had similar. His had no true sump/pit or anything but was a larger diameter vertical pipe sticking out of the ground and they dropped a submersible pump with a hose down the pipe.
Hello , This thread has been inactive for over 60 days. New postings here are unlikely to be seen or responded to by other members. For better visibility, consider Starting A New Thread.
Welcome to TFP! For a wealth of pool care information please check out our free Pool School. If you are in need of specific help then we encourage you to Register and ask us here in the forum!