The PH is rising and the system is red because water is cold. I can manually inject with override when it asks. Does it automatically continue to add? Cold water is no reason to not add acid. I got this to automate, if I have to monitor this manually all winter, that is no good. I was planning on just throwing in a floater for CL and let the IntelliPH handle the acid.
intelliph and cold water?
- Thread starter dfattfp
- Start date
The intelliph is designed to run normally at temps above 52 degrees. I doubt your water is colder than that in Vegas already. You may have another issue.
pool is at 49deg I just don't understand why it wouldn't inject just because the IntelliChlor won't work?
- May 23, 2015
- 24,411
- Pool Size
- 16000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
The whole system is designed to just move water when the COLD WATER CUTOFF engages. It's a safety feature. Freeze damage is always a possibility so the system is doing what it is supposed to.
The good news is this - at 49F, nothing is happening to your water that is of any major concern.
Sent from my iPhone using Tapatalk
The good news is this - at 49F, nothing is happening to your water that is of any major concern.
Sent from my iPhone using Tapatalk
Similar threads
