Can stenner pumps be used for acid additions?
Sent from my SAMSUNG-SM-N910A using Tapatalk
Sent from my SAMSUNG-SM-N910A using Tapatalk
Ok awesome. Also anyone know if you can wire the stenner to a pentair easy touch panel as an aux feature...similar to the pool lights ect?
Sent from my SAMSUNG-SM-N910A using Tapatalk
The biggest downfall of some of the commercially available systems like Pentair's IntelliPH is that the pumps are located right above the chemical tanks. The acid vapors eventually rot away the motor components leaving the user to have to buy spares.
I know the Stenner chemical storage tanks are vapor free - well designed to preclude escaping acid vapors. Is this not the case with Pentair's storage tanks....would be ill designed IMO if acid vapors are allowed to escape the tank.
Working with muriatic acid can be dangerous. When cleaning the IECG always wear rubber gloves and eye protection. Always add acid to water, do not add water to acid. Always work in a well-ventilated area. Splashing or spilling acid can cause severe personal injury and/or property damage. Pentair always recommends 1:1 dilution when using full strength muriatic acid. When mixing, remember to always add acid to water.
IMPORTANT! Replace the IntellipH pump head tube (P/N 522480) once a season (yearly). For units built before 8/2014, replace the whole pump head (P/N 521514) every season.