pool light help

Hi all, New to TFP and pool ownership (purchased this home with a pool over the winter). Reading and searching the forums has already been a huge help. I am hoping someone might be able to help me identify the pool light I have so I can find a proper replacement. Attached are some photos I’ve...

Hello! I have a Life-Bulb LED pool light bulb that works fine with a regular on off switch. I use the remote to turn the bulb on and off, change colors, etc. I have to use the remote very close to the switch because it uses the RF signal from the remote to send the signal through the wiring...

Hi. I have inherited a home with an in-ground concrete pool built in the mid-1960s. The pool light hasn’t been turned on in years. When I tried it, it burnt for under a minute and fizzled out. The electrician seems to think the electrical is fine. My mom was under the impression that the...

Hello everyone, I recently noticed that my pool lights are not turning on. I have a Pentair Automation system and PAL Evenglow lights linked via a PAL PCR-4 box. I opened the PCR-4 box and realized no power was getting to it (the wifi lights were turned off so I assumed no power was flowing to...

All, I found out that one of the led lights in my pool was out of its shell, but still intact from the top. The bottom is completely out of its shell, and I can see the cable from there. There are no screws on this light! I tried to push the bottom to see if it will click in its place, but no...

Hello, TFP! About four months ago, my pool light started going out and would only display in red and white. The spa light still works as expected. At this point, the light simply no longer works and I have not yet been able to get Jandy to warranty it, because I bought my home with the pool...

Both my lights went out so I assumed the bulbs had burned out and the breaker had flipped. When I took out the first light I noticed it was about half filled with water, the glass gasket was toast, and there was a tar like black substance and what looked to be caulk or something. Okay, time to...

I've tried three different pool guys and the Pentair support line and noone seems to want to help or know. Posting here in the off chance someone can help. Have posted a pic. It's a Pentair Intellibrite bulb of some sort but the bulb has rusted out and I'm not able to ID how to pull it out to...

I believe this is a pool light located along the deep end of the pool, but there are no markings at all on it and it looks stained yellow. It does not turn on or do anything as far as I can tell. The pool is 20x40 with 8 feet at the deep end. My issue is this would be an absolutely tiny light...

I'm having a difficulty in removing my pool light fixture. I unscrewed the single screw that holds the fixture (see attached image), but the fixture does not budge. I tried lightly prying it with a screwdriver, but no success. What am I missing? Is there a trick to removing these? All of...

Hi - I have an old pool light original to the pool that burned out years ago now. I recently had the pool drained and thought I might go ahead and replace the bulb, but the top screw holding it in place was NOT going to budge. It was unscrewed maybe 1/4th of an inch already for some reason, so...

Need to replace Pentair pool light which has 5.75" dia face plate but the closest size I find online is 6" so I am concerned that the retaining screw and bottom lug will line up with existing fitting as I think replacing the can would be a real pain which would necessitate drilling or cutting...

We have 3 Pool Lights and use a Jandy Aqua Link remote. I notice when we use the Control box, all of the lights can be different colors, though it doesn't let you pick which colors. When you use the AquaLink remote Every Light will be the same color. Is it possible to use the Remote to set each...