intelliflo

  1. I

    Pentair Intellitouch not talking to Pentair IntelliPump VS

    I recently had my main controller board fixed and I just reinstalled it. I can control the cleaner and I can hear the "clicks" when I activate the main filter pump. However, the pump is not recognizing the Intellitouch and is in manual mode (working just fine otherwise). I wonder if it could be...
  2. G

    Installing SWG with Pentair VS Intelliflo

    I currently have an Pentair VS Intelliflo pump and I want to enjoy my pool more than worrying about the chemicals in this hot SoCal Inland Empire weather. So I have decided to install a SWG but have a few questions first because of the VS pump I have. Hopefully, some of our members can chime...
  3. V

    Pentair Intelliflo XF Leaking at the base after 1 week after changing the shaft seal.

    Hi. My Pentair Intelliflo XF was leaking at the base where the motor meets the pump a few weeks ago. I replaced the shaft seal, diffuser and main o-rings. After, no leaking, then about a week to 10 days goes by and the leak is back. When replacing the shaft seal, the old one did not look...
  4. J

    IntelliFlo RPM Setting + Return Flow

    Hi all, I recently had an IntelliFlo installed. The installer set the pump to run at 2500 RPM when the system is in pool mode. In that mode, the spa's spillway is active and flows the water from the spa to the pool. However, I cannot feel any water flow coming from the pool returns. I can...
  5. O

    New IntelliFlo VSP & Plumbing Plans

    Hi All, We have a pool company coming out this weekend to install our new pump and I'm looking for some suggestions on the configurations. The attached images are of the pool and the plumbing as it is today. Our goal here is to move all of the equipment to one side, re-plumb everything to get...
  6. G

    Pentair Intelliflo VS 2013 version issues

    I turned off my pump the other day to clean my filters, and when trying to turn it back on, it would not react to most buttons I pushed giving me a KEY ERROR, key not in use. Sometimes it would prompt for the password but when hitting the Enter middle key I would again get the key error...
  7. G

    Two pump connection to Easy Touch 4P

    Easy Touch 4P (520591) Does anyone know how or if it is possible to connect a Pentair 3HP Intelliflo VSF pump and a 1.5HP Superflo VS to the Easy Touch control unit? Right now I have the 3HP VSF connected with the included 2 conductor com cable to the com terminal in the Easy Touch. That...