Search results

Have a 15x30 AGP. Had robot run 4 times. Does a good job within the straight edges of the pool, but almost non existant around the ovel areas. Tried starting it all over the pool, but same result! Sucks (no pun intended) to spend $700 and for it to work this poorly. It searching around, but...

another question, can you add chemicals to through the skimmer like you can with sand?

Just a quick update, I don't have the pool chemicals levels from last season. I haven't opened the pool yet this season. I had posted the question, because if I needed to change the sand, It would make most sense to do it before opening the pool. I did the deep cleaning that was posted. We'll...

its 5 years old zeo-clear. Pool chemistry was fine and could not get it clear. This included myself testing the water, as well as taking it to the a pool supply store to make sure. Tried using 10% water salt solution as well as zeosand cleaner, but no change. cant think of anything else

I have to replace mine and hadn't really thought about how to get rid of it? of if it was sand for that matter. I'd prefer not to start a pile of sand in the back yard! thx

Oops. Used Swype keyboard and didn't proofread lol

The liner is about 3 years old. Small slot about 1/2 in. Leak send VERY SLOW. only reason I even know about it is that one of my kids noticed it when swimming under water. What is the best way to patch it up. Haven't had anything like this and am pretty new to Pools in general. Thx

Will definitely put something down, just trying to figure out if should stay with carpet. If carpet, Abby idea what I should look for when buying one for this type of application?

I have a metal pool sidedeck that needs to have the carpet replaced. It's about 5x15 on an oval above ground pool deck, which is on the long side of the pool. Not sure of I should go with carpet or another material. I live in Western MA. What do you good recommend? Materials, cost, pros and...

Hi, just opened up my pool and realize that the pool timer was not turning the filter on and off. It visually looks fine, the trippers go to the switch but never actually TripIt. I can turn the electricity on and off manually without an issue. The gears behind the dial look fine. The timer wheel...

So I opened up my pool and the side deck, which is carpeted gray, has some staining on it. What's the best way to clean this? Recommended products? I'm assuming a limited amount of products would b ok to use since you gotta be careful with getting whatever you use getting in the pool. Thx

Filter and o ring< 18 hours old:) Sent from my iPhone using Tapatalk

What I can think of, is that I lubricated where the o ring meets the valve, but not where the valve sits on the filter. Could that of been my mistake? It's on both sides where the clamp is tightened by the screw Thx Sent from my iPhone using Tapatalk

Lol, I guess 40 it is! Sent from my iPhone using Tapatalk

Cya at 35 Sent from my iPhone using Tapatalk

No worries. That's why I'm asking these questions. I'm new at this. I'll check levels when I get home and post them here. Sent from my iPhone using Tapatalk

Yes I am. Using the tf100 test kit. Ph was actuality a little low, now it's at 7.6. Chlorine at two. Forgot the value for the cya, but remember being in the "good" range Sent from my iPhone using Tapatalk

I've used both at one time or another Sent from my iPhone using Tapatalk

Granules in the skimmer. Seems to be a pretty common practice from what I've read and heard. Sent from my iPhone using Tapatalk

See white haze coming into the pool after putting in the skimmer. Just wondering if this is normal. Thx S180t hayward sand filter for agp Sent from my iPhone using Tapatalk

I have an above 15x30 oval above ground pool 52 in deep. 2 speed 2 hp pump. Sent from my iPhone using Tapatalk

Here's how it looks now (through. Window screen) Sent from my iPhone using Tapatalk

I'm an idiot! The PSI that I referred to above was when the pump was on low. When it's at high-speed it to 12 to 13 PSI, which seems more normal.The water is now more cloudy than green. Seems like the pump stayed on overnight on low. I back washed it for about 5 min last night. So maybe that...

After reading a bunch of posts, I'm wondering if I have an air leak or the impeller has debris! From what I've read, 6 psi seems awfully low. I'm going to look and the impeller hopefully later today. Anything else I should look at? How would I check for other air leaks? Sent from my iPhone...

sure, no. It seems to be as it goes to zero with pump off and goes up a few lb over a few weeks (last year, this year hasn't even been a week yet. Let me know if there is something else I should be looking for. Thx

Here's a picture of the pump+ filter I took when I was opening the pool. Sent from my iPhone using Tapatalk

an abobe ground pool, 15 x 30 with side deck. Live in western MA. Opened it ( or at least started) Friday June 3rd. I also posted this info as part of another post, which now I think is related! Aquabug not cleaning whole pool Connections are with 1.5in flex pvp pipe/hose.

Thanks. I backwashed this morning and left the pump on. I also shocked the pool. We'll see how it turns out. I do have to say I didn't rinse it, so I'll have to do it later. I do have to say ( and I'm new to the pool thing) that i sasw the pressure gauge say some where between 6-8 psi and...

Well, I think figured out why it was missing a large portion of the vacuuming. The pump seems to only be circulating water for a couple hours, so not enough to allow full cleaning. I posted this under the pumping section of the forum, but since its related, ill mention it here: Have a 15 x 30...

Have a 15 x 30 above ground pool to horsepower two speed water pump and sand filter. Hadn't noticed it before because I thought it was the timer going off during the time I get home from work. Yesterday I noticed that after about three hours of the pumping on, the pump continues to run but the...