Search results

Great writeup! Thanks for taking the time to share all that info.

Any feedback to report yet on the Seauto?

I can't personally speak to the reliability of other brands besided Maytronics, but the forum activity here seems to indicate they all are prone to wearing out in 3-5 years. Maybe another brand has more readily available spare parts for DIYers willing to fix them on their own?

Hey All- I think I have successfully fixed my Dolphin S200 that stopped moving a couple weeks ago. The problem was wear on the spindles of some of the gears in the transmission attached to the drive motor. It got bad enough that the gears would get jammed when the robot transitioned from...

That probably wouldn't help, but if I could find an equivalent motor, maybe 3D printing something to reconnect it to the old drive gear and bulkhead would work. More likely just some epoxy would work.

My SWG died after ~6 years, but it wasn't the cell that died- the power unit croaked, so they both needed replacing and I couldn't get the same form factor anymore, so I would've had to plumb in a new generator. I opted to go back to liquid chlorine and tablets. Their cost was less (this was...

Have you checked the price for a Warrior SE today? I paid $600 for my S200 5 years ago. That works out to about $30 a month for the 4 months a year I use it (which includes the extra year or two I got out of it by replacing the impeller bearings myself). Today that or equivalent models are...

I can't wrap my head around this. What is wrong with the 98% of people willing to get fleeced?! We need them to take part in a boycott protest. The profit margins these companies are making must be crazy high. I wouldn't be surprised if there were some type of price collusion or...

I did read that review with interest, but without any longevity and repair data yet, I have no reason to believe it will last any longer than the Dolphin. It will be great if it does, but I'm skeptical.

I just found the ~30 page thread on your Dolphin experiences and read through the last few pages. Lots of good info there, including the downside of the electricity usage of the pressure side booster pumps which I had forgotten about! I think we have a similar mindset. I am pretty sure my...

My Dolphin S200 is failing. Again. It is 5 years old. I replaced the bearings in the impeller motor a year (or two?) ago myself with great success, but now the drive motor seems to have reached the end of its life and is seizing. Unfortunately, based on Internet searching and the forums...

I passed the OCLT with .5ppm of chlorine loss and 0 CC last night, so I think that confirms the test tube contamination was the problem. Thank you for that suggestion! I am aware the trichlor adds CYA. I keep an eye on it. It was up at 80 at the end of last season when my SWG kicked the...

This may be the culprit! I just soaked the test vial and pipette in bleach for a few minutes and rinsed them out- the test vial showed kind of a yellow discoloring after that, so I got out a scrub brush and scrubbed the inside of it out really well, rinsed it again and took my evening...

Thanks for the suggestions. Other pretinent info- the pool was replastered last summer. The chlorinating ducks in the photo below are removed during the night when I am doing the OCLT. Here are some photos. The pool (with my test kit and 10ml pipette for accurate filling of the test tube)...

I'm still struggling here- it seems like something is wrong and I am making no progress here and throwing money down the drain continuing to SLAM. My pool is clear. I have no signs of algae- there is no dead algae or "dust" accumulating on the bottom of the pool anymore. Nothing seems to be...

Thanks for the info. I'm starting to think the overnight FC not dropping was a fluke reading that one night. It dropped from 29 to 26 last night and I still have CC at 2.5, so that all indicates the chlorine is still working on something.

Hi All, I have been SLAMming for a week to deal with a mustard algae outbreak and am getting inconsistent results. The pool has been clear for a few days, but chlorine usage is inconsistent. For example, last night before bed I had FC: 28 CC: 2 PH: 7.6 TA: 90 CYA 70 In the morning I had FC...

Seasonal draining to get the level low enough for Winter freezing and multiple additional drainings for rain/snow throughout the Winter are responsible for most of my dilutions. Backwashing loss during the season contributes some, and this year has been so rainy I had to do an extra long...

My Circupool RJ-45 just died after 6 years of service. The cell probably still has some life left, but the controller died- I can see a burned out power transistor on the circuit inside. Last year the keypad died on it and the Circupool warranty only prorated a replacement, and not by much...

Update for anyone interested or future readers: My wife talked to Circupool today. They said this is typically a problem with the keyboard. They will send a replacement for ~$50 and we'll see if that fixes it. In the meantime, the system is now stuck with a water flow error despite there...

Hi All, I just discovered this evening that the buttons on my 5 year old Circupool RJ45 SWG are no longer working. The display still works and the unit functions but pressing the power button, holding the OK button and all other buttons results in no response. I took the controller apart and...

I'll try linking some photos. Let me know if the links don't work- I haven't tried sharing from Google before... This one shows the crack where it looks like the upper part of the pool is pushing out: https://photos.app.goo.gl/tmbHkKYa3MV415fn2 This one shows the layers that have deteriorated...

Hi All, Since moving into my house 6 years ago I have been having problems with the tile line on my ~ 30 year old gunite pool. One whole section of tile came off a few years ago. I discovered I couldn't get the same tile any more- they don't make it, so I used a section of a similar pattern...

I was having the same problem with my Samsung S7. I got a message saying Sign-In Failed. Something went wrong signing in, please try again! I discovered it was due to some sort of filters or blocking of the authentication on the Wifi network I was on at work. I turned off my Wifi and used my...