Search results

did 5a and 5b I dont have all the sensors of 5c so skipped that one wiring harness showed continuity. Sometimes I have to hold the display down for the display to show up and say communication error. 3 years old. Replaced by leslie pool supply in july 2021 Called leslie on advice of hayward...

Thanks I went thru all the steps and it needs a main board replacement. How can I find out the warranty on this since the main board was replaced under warranty in summer of 2021

Did you ever figure out the part number mine looks similar to yours and all it says is communication error

Trying to figure out how to trouble shoot a communication error on this thing everything seems plugged in turned off breakers for 30 minutes and turned them on again same thing, what are my next steps?

Okay thank you for the info i'll go grab some liquid chlorine I appreciate all your help

will do,in the meantime should I just throw a chlorine puck or two in there and keep the water circulating or what?

Okay thank you for all your help i really appreciate it not sure how this thing could have burnt up in less than 3 months

New fuse didn't work and no continuity from yellow and orange wires on either set, when removing the orange wire i saw something flake off and it looks like this piece got burnt? Not sure what happened to it is this a full mobo replacement? that other piece is just sticky for some reason i'm...

Got 0 on both. Testing orange and orange and then doing each rectifier separately red/black give me 0. that picture is exactly how they are wired

last picture is of the red/black wires and where they go tried to test on the board

So I placed a call to hayward and they said they would have the warranty department email me within 3 days to start the process but just want to make sure I didn't miss anything since they have no "technical support". aquarite pro model. Checked 240v between red/black wires. checked 120v...

My plaster will probably need replacing within the next year or 2 and I happened to run across an ad on one of the facebook groups for someone selling some pool tile mosaics 1x1. He has 840sq ft to sell and if I purchase them all I can get them for 4k. Reading thru here I know I can only use...

Would you not have to even bother with the redguard or any other waterproofer? It acts as a crack membrane as well just thought that would be more peace of mind. Hadnt thought about the grout lines those would be a major pita.

Best thoughts happen while drinking. Or at least the most random. Finished a shower install and was wondering why can't you do the same thing in a pool. Assuming the plaster is in decent shape why would putting some aquadefence or redguard down in 3-4 layers thick .4-.5mil thick. Mortar. Mosaic...

So installed a new pump a week ago everything seems great, got some rain in last night and I woke up to the pool half empty. Not sure where to even start. No visible cracks or anything like that filling it up now and I'll see if it drains overnight. Any advice or how I can test anything?

no challenger series

So i've changed out the pump shaft seal, the locking screw and the impeller. It still leaks from the top where the shaft seal goes. Changed out the shaft seal and it still leaks. Cleaned shaft itself and still nothing. Anything I can be missing? Thank you

i've changed 26,13,12, and the seal set ps200 #3. I can't find any place for a seal on the seal plate?

Changed out the entire pump motor and still got the same problem. Put in old seal vs new seal same problem. Changed impeller bolt same problem Changed impeller itself same problem. Took apart and seals are still in place everything seems normal I can't figure this out. Crappy pics from...

hmmm weird i wonder what the difference is, i've changed it twice with a ps100 and both times its held water for 6-8 months. Digging thru the pump i've only encountered the pump seal. Im not sure where the plate seal gasket is but all the other ones i've changed last year and they were good. -...

So I have a 12yr old challenger pump when it works it works as a champ lately its been eating seals once a year but its no big deal since its toward the end of the summer when I mow the grass short and some of the clippings end up in the pool impeller ( i still can't figure out how) Anyway this...

Tried it still turns on with all the tabs down.

Just installed a brand new complete timer and its still not turning off. Even with the tab closed it still runs but now it does turn , so the only other thing it can be would be the relay?

http://www.amazon.com/Intermatic-Timer-Motor-T104M-WG1573-10D/dp/B0055DWO4W/ref=sr_1_2?ie=UTF8&qid=1427932521&sr=8-2&keywords=pool+timer+motor like one of these? I'll pull it before ordering it to compare part numbers of course

Guess the pool timer died its an intermatic PF1102T and it is about 10+years old. Should I change out the whole unit or is there usually 1 thing that goes wrong related to the timer?

Trying to decide wether to repaint since paint is already peeling or should I do the whole deck with these Ordered just a small quantity to try them out feels great but since the pool is roman it does look weird on the half circles. Any thoughts or what paint is recommended to repaint?

ya didn't notice it earlier but yep seems to be a missing chunk. Tried to reinstall it just to have band screw strip yay.

Here is the pic of it back onto the pump there cracks all over it Here is a pic of the seal I replaced maybe 3 or 5 days ago.

Found a problem and the gasket/oring wasn't included in the kit that I bought :spiderman::spiderman::spiderman: Can't figure out what its called or if its available on amazon can anyone help its going onto a challenger 1hp pump its the gasket attached to the motor on the pic below Can't find...

Not that I could tell pulled it apart again just to be sure, made sure the top piece went into the bottom piece but beyond that not sure.