Search results

  1. A

    On the right track?

    Hi all!! It has been 2 weeks of going pure swamp with slam and I just want to make sure I'm not over looking anything Brushing 2-3x a day minimum Vacuum daily, every other day Testing the pool minimum 3x a day I have a TF100 kit I have to go out and get more chlorine as we are out and I just...
  2. A

    Is it hopeless?

    That's what my plan is. Good luck!!
  3. A

    Is it hopeless?

    We haven't been able to touch our uncovered inground pool for 2-3 years due to health issues. Is it hopeless to try and get it started back up? It looks yellow ish Full of leaves I purchased a TF100 kit last time I was in the States (October) in Hope's to get it started back up I believe...
  4. 20200523_120255.jpg

    20200523_120255.jpg

  5. 20200523_120307.jpg

    20200523_120307.jpg

  6. 20200523_120337.jpg

    20200523_120337.jpg

  7. A

    Unknown major leaking when pump is on... can I fix this myself and where do I begin?

    I'm unsure as to what you mean. There are only 2 lines running, one from the filter to the return lines (meets an automatic chlorinator part way through) and the other coming into the pump. The filter itself I don't believe is leaking water as there is nothing around the filter itself especially...
  8. A

    Unknown major leaking when pump is on... can I fix this myself and where do I begin?

    I have an 18x36' lazy L inground pool in my backyard. It has a skimmer hole and 3 return jets I am using a supermax pump and a sand filter at the moment I did the bucket test, and the water remained the same after 24 hours however, when I turned the pump on high for a couple of hours, to get...
  9. A

    Air pockets in corners??

    Well below the jets. Maybe a half foot to a foot below
  10. A

    Air pockets in corners??

    Hi all, Just about to open my green inground pool from the winter and when I was doing a walk around I noticed the corners of my pool are no longer flat but bubbled out. Its like they have air pockets stuck in them. I am not sure what to do and am afraid to fill up pool/get system back up...
  11. A

    Nothing but problems with this pool :(

    Usually I would put the priming plug (rubber stopper with hole in the middle attached to hose) in my skimmer hole. It filles the lines with water (filter on recirc) and pushes air out of return jets. Once there is no more air and lines are filled with water I start my pump. But now when I try...
  12. A

    Nothing but problems with this pool :(

    We started the opening procedure of our in-ground pool last weekend. We took the cover off, filled it up to the line with water, and put degreaser in, changed out the sand (21" cooper ranger". When we went to turn the pump (jacuzzi magnum force) on, it wouldn't prime. Eventually found out...