Search results

I may need to try something else. I tried chlorine tabs in a floater ( Yeah I know got a pool man to handle pool as I was unable to for a time) and he put in chlorine tabs . Well the bottom of the floater fell out and the tabs that were in left a round stain. Question....what is the way to...

thanks for getting back

How much should I pay for a cover reel? I looked and they were from 250 to 1,000 Any thoughts would be appreciated thanks Dave Gale

well looks like I need a cover Im only getting 82 degrees when its 95 outside. And my utility is about 200.00 because of air cond. House gets pretty hot when its 95 outside but not the pool even with the solar on the roof BTW I don't think solar panels are all that great

I know this is somewhere else on this site, but I read thread was a long time ago and I should ask to get sooner answers. OK my temps in Cal where I live in summer are 85-95. 95 being tops. Pool is too cold for me at 82 degrees. So would a pump work since the ambient temp in summer would place...

Its just a sweep that wheels will not move. Im having it checked, as I got the sweep kinda second hand if it cannot be fixed I will buy new. Thanks to everyone with the advice

ok I tried to move wheels and they are free but I saw a large crack and hole in the bottom. Do I have to fix them before the wheels turn properly? I plan to fix the hole, just wondered if that could be the main problem to make the wheels turn.

Thanks I will try that I'm new to this cleaner

My Polaris sweep wheels wont move. What in your opinion would make the wheels not turn? Yesterday it ran great. Thank You Dave

thank you I will look for the cover and reel

Ok, now I've read some stuff about reels and covers. I have a 15x35 inground fiberglass and I want a cover to get the pool warm as its normally top 80's here, and I have solar on the roof. Now what cover ( flat.. bubble etc) and what reel and how to cover reel when not in use? Thank you Dave

thanks provia will do

I tried a lot of them but they just get stuck...hoses leak..don't climb or its something......any ideas??

I took off all the hoses and just an open port from sidewall so no more leaking hoses. Gonna have to buy a new one

I did make progress and if it were not for this site and help from you folks it would be much worse many thanks

unfortunately still bubbles not as bad though

Thanks Much have a good week everyone

I do have 3 extra hoses so I can put those on first and then go from the next ones one at a time to find any bad ones. Yes I did place each hose in water to purge but I guess something went wrong so I guess 3 new ones and then check any others that I am using to find the culprit. I wish there...

ok this is what I did... I removed the pool cleaner with hose and it startled to really bubble up for a while and now it stopped. Is that a hose problem? How to check...go hose to hose or what do you folks think? I know no one has heard of a voyager pool cleaner but its vacuum like my mx 8 was...

Whenever the pool pump is turned on no matter what, I get bubbles. My pump runs at different speeds during the day but if it runs at 2500, 1500, or 750 I will get bubbles

I am going to try that just straight from port no cleaner have to do tomorrow it 7 pm here thank you

ok I checked the hoses and they have good suction, I pulled them apart just to double check and put them back together. I went to the filter housing and again filled with air. After I opened the small air bleeder for a little while for the air to bleed out...I was really hoping for a cracked...

Thank you so much I have extra hoses and I will first replace hoses that are on the top of the water and go from there thank you

Sorry my fault. I have a dedicated vacuum port on my pool. I connect my hoses and cleaner to that port I have had many cleaners but none work all that great and now I have one called a yoyager. It seems to work well so I didn't think it was a problem with the cleaner and this bubble problem is...

ok let me say it like this as I may not have wording correctly. When the water goes to the hose and then to the cleaner its ok. The other opening on the pool sends bubbles and lot of them. So, if one outlet is for the vacuum side and the cleaner is connected there which it is, then what is the...

Tex, I did all the water test, valves skimmer and all no go. The valves are fine. Is there any place else I am missing before I call a pool fixit man? No cavitation as yet and my water level is ok it went down but I made sure it was filled as you said. Thanks Dave

I am getting bubbles constantly from the return side port on my fiberglass pool . Its a vacuum side so could holes in the cartridges cause that also water is going down and I have no leak I can tell. Thanks Dave

Not as yet but I will have as I haven't found a vacuum one to do a good enough job

I am thinking of a booster pump as all I have is a dedicated vacuum port. Is it tough to hook up? I have a plumbing background so that should help. Where should I look for advice on construction? Thanks Dave

what kind of cover mas and how many panels?