Search results

The step lights are: Jandy watercolors nichless 12 w colored

All lights are colored. Yeah the lights seem to power cycle when changing color (they cycle through the colors) They are Jandy colored lights.

yeah - noted. Summarized the ask state of play as: I just want to use the single aux port on the panel, and by using this splitter box, enable me to power on/off both the relays for the low voltage and high voltage devices at the same time. . This means either: the coil side of relay 2 is...

@ajw22 Yep I was not diving in deep enough - found the schematic for the system - correct, the relays themselves output 120v. So in my case the main pool lights are on relay 4 (connected coil side to aux port 4), and I want to connect relay 7 which is connected to a transformer to 12V for...

yeah sorry for the confusion. I want to control 1 x 120v device (pool lights) and 1 x 12v device (step lights) from the same aux port. I just want to use the single aux port on the panel, and by using this splitter box, enable me to power on/off both the relays for the lowvoltage and high...

Recommended by the electrician who wired up the pool. I too am wondering why connecting a relay to low voltage step lights and the high voltage pool lights with a splitter would be an issue. In the zodiac 5098 splitter installation instructions it says “to be used to control two high voltage...

I want to control the main pool lights and the lower voltage step lights off the same relay. Is it possible to use the Zodiac 5098 relay splitter and power on/off the main pool lights and the step lights together? It was recommended to NOT connect the lower voltage step lights and the high...

All of the JVAs are occupied, yes have a temp sensor which occupies the Solar JVA, and the cleaner dip switch is on so the cleaner JVA only comes on when the cleaner is on (so it's not actually free). Now to get another JVA in the system I used the Zodiac 5254. This enables you to use a...

Mine is an RS-8. The board I bought allows a Relay to be used by a JVA. I didn’t have a spare JVA as I have a pool/spa/cleaner and Solar using the JVA ports. So now I need another aux/relay to keep the step and beach lights separate,

Where can I find this in the App? Do I need to physically check the system board?

Hi there I have a new system that has all relays (AUX ports) used and I want to know if there’s a relay expansion board I can purchase. I recently added a Zodiac 5254 JI/Aqualink AUX/JVA Relay Board to get another JVA for the chiller - but now need another relay to connect the step lights to...