Search results

Anyone every seen this? I have an iAqualink and have a Jandy ePump (VSSHP270). My iAqualink is hardwired (not using the Wifi antenna). Lately last few days to a week now Ive noticed my ePump is running ful, tilt. But here is the MAIN issue. The RS8 keypad shows nothing is on, the iAqualink...

I had originally on this setup a Sta-Rite Max E Pro 2hp single speed pump, working fine, no issues with it, no air in the basket, worked fine. Just ended up getting a great deal on this Jandy ePump VSSHP270AUT model. So we went ahead and installed it. Now the Sta-Rite doesn't match piping so...

I have a few that don't spin properly under load. Tried to turn it left as hard as I can and not seeing it comes loose. Not a lot of room to grab it with the pool surface digging into my hands. Anyone know how to remove these so I can purchase new ones? Here is the picture I took off my phone...

In my quest to find ways to use more JVAs, I want to allocate the Solar JVA to something but my iAqulink keeps telling me that the SOLAR JVA is used when I don't have it connected nor do I have a Solar temp sensor connected. How do I make the system let me use it? How do I disable this? Do I...

I have a combo pool/spa with an iAqualink as mentioned in my signature. So its already using the Intake/Return side JVAs for the pool/spa mode. I also have a Caretaker infloor cleaner which is my main return technically. I also have a leaf B gone. These are only "returns" for the pool (well...

I have this 8yr old Spa (built with my pool) and I have 6 of these Waterway Poly Deluxe Jets. Different types. Some of them I can turn then counterclockwise to essentially run full flow and clockwise to cut down the flow. But I cannot get the entire jet off. I see some pictures that seem to...

Right now I have a setup (as shown in my signature) where my main pump/filter/swcg are all shared by the pool and spa. So when I switch to SPA mode the return/supplys automatically change over as designed. Now I have popup floor cleaners as my main return, I don't really have any other returns...

Just wondering if this a cheaper/feasible option. Im running low on my CYA granules, barely 1lb left, need to order some of that. But was wondering since I need to raise my CYA anyways (its 40ppm right now) and I need to shock my pool, what if I just used Trichlor or Dhiclor (poolcalculator.com...

I just took some ownership of maintaining a 110,000 gal reflection pond at our temple here in Atlanta. It currently has a 6 cell (all inline) AutoPilot SWG, has two 2hp pumps going into 3 massive sandfilters (each one I would say is 3ft in diameter). Then there seems to be two massive pumps...

Its my negative edge pump for the spa to the catch basin. I dont use it often (right now since its offseason), maybe once a week just to move the water around. This last time it was way too noisy. So went over there, pulled the motor part off, turned it on, and it was noisy for sure, so I...

I have this area (bought the house about 8months ago) where its about 11.5' by 16.5'. In that area is where my pool equipment is (heater, pumps, filter, air blower, pipes, etc) and also the other side of it (near the wall) is where all 4 of my AC condensers are. Right now the ground is...

This is somewhat of a side topic, not really pool/spa related but I thought it was more of a chemistry question. I cant remember chem101 for the life of me. I have about 9 184oz of 6% Chlorox Bleach (inside my house and in a dark room about 65F) and my wife just ran out of that Chlorox Cleanup...

I currently have a iAqualink where I have 4 devices (2 per connector) connected to the PCB. I have the iAqualink, LX400 heater, RS8 Control Panel inside, and Aquapure Ei SWG. I want to add possibly the ePump or VS FloPro in a month and allow it to also be controlled by the iAqualink but I read...

Just recently bought this house about 4months ago and fixed/revamped alot of the pool equipment, all of that is listed in my signature. Now since there is no safety cover that was given with the house, nor is there even any anchors in the deck/stone around the pool, theres no easy way to put...

I have a Jandy CL580 and it has 4 large Filter Cartridges that are 7" in diameter and 33" tall. I cant find a single trash can or something similar to basically be able to put these in to let them soak in a TSP solution. Most of the round trash cans are only 31-32" tall. My filters are 33"...

I just took ownership of this house about 2mo ago and pool was in OK shape, had to redo a few things, ended up converting it to Salt water, fixed the LX400 heater, fixed the Caretaker 99 5way valve, replaced the cracked CL580 filter tank bottom, replaced the seals on the motors, the list goes...

I have a combination pool/spa setup on my main pump with a Jandy Actuator on the drain (inake) side of the pump. Here is a picture to get an idea of the setup. Now I have a suspicious feeling that the diverter inside the 3way valve under the JVA is leaking. Because when the pump for the...

First off here are some of the latest pool test levels (off my Taylor K-2006). FC=4.0 CC=0.0 PH=8.0 TA=80 CH=300 CYA=70 Salt=4200 The Salt was measured using the Taylor K-1766 kit. Now the water is crystal clear and no issues with the exception that I have to keep adding say about 5oz of...

So I just recently bought this house and they recently (in the last 5yrs) had the pool/spa combo built. The pool has those Caretaker 99 heads to self clean the pool. My other house has a 40,000gal (18x40') pool with the Polaris 360 cleaner we have to drop in every so often. Now I noticed on...

So here is the story, will try not to make this a book. -------------------------------- Pool info: Approximately 14,000 gal pool Sta-Rite 2hp P6E6-208L main pump Jandy CL-580 cartridge filter Jandy LX400 heater Jandy Aquapure Ei Aqualink RS8 RevL -------------------------------- So initially...

Anyone have this? Im more than capable of doing my own wiring, I have ran over 2miles of wiring in my own house when I built it so Im more than capable of doing it. However I noticed the manual doesnt explain at all what the breakdown of the 4pin green wiring block is. I asked Jandy tech...