Let’s see your water after removing winter cover!! *PICS THREAD*

This morning. Weather is horrible! Snowed all day while we cleaned it up and started to balance

Fc 3, cc 0, ph off the chart! 80 oz to get it back to 7.6. Ta 70, ch 175, salt 1800, cya 0. I took water out like 12 times this winter. Then this week 9 inches of water added due to rain. Horrible.

6 hrs of the robot to get all the worms and dirt up and I still need to run it more tomorrow hot water is clear. Not even cloudy.

Water 46.
IMG_2125.jpeg
 
Northeast PA. Opened this past weekend. After talking, realized we never put Algeacide in at closing in Nov. Collage of opening day, and a day later below!

View attachment 560897

I stopped adding poly when I close. With closing really late when water is in low 50’s and opening with water still in 40’s never should be an issue. Just close it at slam level and u should be good.
 
Here’s the sneak peek 👀
IMG_9607.jpeg
The sun & shadows were playing tricks with my camera but I could still clearly see where I wrote my M in the pool with vit C. Looks like a W from this side.
IMG_9608.jpeg
Just dipped a quick sample off the top - no mixing has occurred yet.
May throw the bot in for a little while to mix things up until I get running.
 
Last edited:
This was taken 5 minutes after pulling the cover.
I will let the water circulate for a day or 2 before running numbers, but I did set the Stenner back to it's schedule for injecting chlorine.
Not bad for opening in the South! I’m sure your water temperatures are much higher than they are here.
 
Ok y'alls

View attachment 561401

Soft open complete.

View attachment 561402



View attachment 561405


View attachment 561403

This week is going to be wet and cool. After next weekend there are alot of 60s in the 45 day and the lows will only be 40s. So I got to bringing out and assembling the pad, then flooded the system and let er rip.

The liner is pretty dirty but overall it's looking great. I'll probably pop the cover next weekend unless the forecast changes as it does.
Those photos are a tease! 🤨 Meanie!
 
  • Like
Reactions: Newdude

Enjoying this content?

Support TFP with a donation.

Give Support
Here’s the sneak peek 👀
View attachment 562937
The sun & shadows were playing tricks with my camera but I could still clearly see where I wrote my M in the pool with vit C. Looks like a W from this side.
View attachment 562938
Just dipped a quick sample off the top - no mixing has occurred yet.
May throw the bot in for a little while to mix things up until I get running.
Just open it, girl! I’m getting impatient here! lol!
 
Not bad for opening in the South! I’m sure your water temperatures are much higher than they are here.
62 degrees this morning.
We had our probably last cold spell night before last so my winter break is over lol 😂
I don’t go “topless” for a while - too many squiggly thingys falling from the sky. I soft open.
 
  • Love
Reactions: thefloatqueen
sigh*

The grand opening is canceled. Going scorched Earth on the acre instead. :(

It has to be done.

View attachment 562547


Just Do It Shia GIF by MOODMAN
 
Very shortly after pulling the cover. My 14 year old son was still helping dump the water bags.

View attachment 561781

And my wife got this yesterday; my 3 year old son helping me "count drops" as I did the first test after topping the water and adding some salt on Saturday.

View attachment 561782
I LOVE IT!!! He will be a TFP Expert long before I ever will be, lol!
 
Last edited:
  • Like
Reactions: Mdragger88
This morning. Weather is horrible! Snowed all day while we cleaned it up and started to balance

Fc 3, cc 0, ph off the chart! 80 oz to get it back to 7.6. Ta 70, ch 175, salt 1800, cya 0. I took water out like 12 times this winter. Then this week 9 inches of water added due to rain. Horrible.

6 hrs of the robot to get all the worms and dirt up and I still need to run it more tomorrow hot water is clear. Not even cloudy.

Water 46.
View attachment 562577
You have a beautiful pool! My water was a little over 55 degrees F when I opened. I’m curious….since your water temp is so low, did you just let your water sample warm up inside before testing CYA? I wanted to test mine again yesterday but the water was only 53 so I let the sample sit overnight. Wondering if it’s still good for testing? 🤔🤔 I should know this by now lol
 
We open with more FC than some folks use mid season. :cheers:

View attachment 562941
My FC was 9ppm when I opened (I let the pump run a few hours before testing). I closed SLIGHTLY above SLAM level and used a solid cover, but was still surprised my FC was so high upon opening lol. I could never go the Polyquat closing route. The low FC would drive my OCD crazy!
 
  • Haha
Reactions: Newdude

Enjoying this content?

Support TFP with a donation.

Give Support