Iaqualink & Jandy 2.0 VSP

Jump to latest Follow Reply
boston62

boston62

LifeTime Supporter
Jun 7, 2014
489
Fort Myers, Florida
Pool Size
13000
anyone know how to set a schedule to run my pump @

1. Start 8:00 - 8:59 AM @ 3000 RPM
2. 9:00 AM - 4:00 PM @ 2000RPM'



The problem it will not run in the Schedule, but i can hit the Pump Button and it runs at the correct speed for that time..

Zodiac is not much help...
 
Thank you for that info...I have seen so many videos, but no help. The system is 14 years old, but runs with no problems until a week ago...I can change speeds manually, but in a schedule it will not start at time specified.
 
What is the Rev level of your Aqualink?

You need at least REV O from 2008 to control VS pumps.

You should have at least Rev R from 2012 if you have iAqualink.

Post screen shots of your VS pump setup pages and schedule.

@PoolGate @MSchutzer may be of help.
 
Can you show us what your Schedule page looks like?
 
The Wiki discussed that the default Speed Labels should not be changed. They need to be left as the Jandy default.

1 must be Pool
2 must be Spa if you have a Pool/Spa system

You can change speed labels where you do not have that device. But you have a pool and so 1 must be Pool.

Jandy_Aqualink_Default_VSP_Labels.png
 
well that didn't work, the only thing I can think of is the Iaqualink 2.0 antenna I added to my system, I had the 1.0 blue one that came with the unit, which the antenna broke off, so I replaced it with the new 2.0 antenna.I really don't think this would stop the schedule from running.
 

Enjoying this content?

Support TFP with a donation.

Give Support
Show us all your VSP screens and your schedule screen.
 
You must log in or register to reply here.
Top Bottom
Back
Jump to latest Follow Reply