IntelliChlor SCG circuit board JP2 and JP4

Jump to latest Follow Reply
MyAZPool said:
The IntelliChlor Controller Circuit Board communicates to the IntelliCenter MotherBoard via an RS-485 4-conductor, 22 AWG or larger cable.
The cable connects to either JP2, JP3 or JP4 on the IntelliChlor Controller Circuit Board and connects to either of the COM PORTS on the MotherBoard. Either RS485-A (J5) OR RS485-B (J4).
Here is a diagram and which can also be found on pp 33 of your IntelliCenter Control System Installation Guide.
Click to expand...


1707593049415.png
 
So any of the JP2, JP3 or JP4 can be connected to the motherboard Comm port J4 or J5. OK thanks. I have two wires (a green and a yellow data cable) double connected on the same connector on the intellichlor connector. Should they be moved to one of the other comm ports on the intellichlor board?
 
  • Like
Reactions: JamesW
You must log in or register to reply here.
Thread Status
Hello , This thread has been inactive for over 60 days. New postings here are unlikely to be seen or responded to by other members. For better visibility, consider Starting A New Thread.

Similar threads

N
Intellichlor SCG circuit board
Replies
11
Views
545
Salt Water Chlorine Generators (SWG)
new2poolschool26
N
K
Upgrading legacy pentair easy touch with SCG tab
Replies
4
Views
93
Pool Automation
krustykramer
K
R
Adding chemicals
Replies
12
Views
153
Salt Water Chlorine Generators (SWG)
rjb1211
R
F
PENTAIR Load Center IntelliChlor SCG Surge Board PCBA 521593 / Screenlogic2
Replies
2
Views
238
Everything Else
Jimrahbe
Jimrahbe
E
IC40 12A Thermal Circuit Breaker Tripping
Replies
8
Views
770
Salt Water Chlorine Generators (SWG)
ewag316
E
Top Bottom
Back
Jump to latest Follow Reply