Recent content by tmadson

Thanks. I added calcium just given everything I read said i was too low. I'll see if I can figure out the soft water.

Right after fill, my hardness was Right after fill, hardness was 110 which was odd to me because it was over 900 when i drained it. All of my readings are using the same kit. I also use pool calculator. I have added some calcium to get me over 250 but I'm not adding anymore. Yes, i have...

Pentair clean and clear plus 420. I agree on the better water management. The drain and refill is my new start. I don't want to go through this cleaning thing again.

So, I just had the calcium sprayed from my pool. It was a complete drain and refill. The company left a ton of residue and I think even washed a ton down the drain. I cleaned the filters out and alot of it came out. It was so bad there was 3 inches of sludge on the bottom of the filter housing...

Thanks for the assistance. Appreciate it

ugh - I don't have a vacuum - I should have stuck with the slow and steady way - that stuff is stubborn when it comes to dissolving in open water. If I push it into the drain, am I going to hurt anything? It will at least get it off of the plaster

First time using liquid stabilizer (and last time after this). I shook it and poured it around the edge. It's part milky substance but many whole granules just like using the dry stuff I normally put in a sock. It's all over the bottom. From what I've read, can I just brush into the main drain...

I just installed the Tru Clear and use the 1766 kit. It works great. Super easy to use. Although, there may be an argument between brick red and brown.

All. I got someone out to connect to the auxiliary. Had to call jandy as the owners manual diagram did not have a scenario for 1 power source. After a small jumper on the motor, works like a charm. Turns on at 1750 rpm and shuts off on waaaay back down at 1750 rpm. Perfect!!

After the 7 th drop, it looked clear. Maybe the stars aligned for it to happen but the green looked gone. In any case, i'm registering 80 and will stop being stingy and go one extra. I normally stop when i see the color change but I'll start adding one more.

Ha. I hear ya but after multiple times of that last drop doing it from clear, i stopped. So sounds like after both responses, i'm registering 80. Got it. Thanks

Quick question... this gues for anything but in this case, it's TA. Water turned clear at 7 drops. The next one would have been red but I saved the drop. The question is... register 70 or 80?

That entire container will come out. That's where the swg is going

I think just the iq pump. Says IQ interface. Here is a pic of the wall control. Might have to zoom in

Yes, and i use it for the pump but I think the guy is saying it can't be used for the swg. I love it for the pump.