Recent content by SteveB48

KitchenAid / Nextgrill KitchenAid 4-Burner Built-in Propane Gas Island Grill Head in Stainless Steel with Rotisserie Burner-740-0780 - The Home Depot I do have some 1" insulation left over from the pizza oven build if that's useful. Insulation Blanket - Pizza Oven - Forno Bravo

It's a slab but 2mm not 3mm. How far would you cut the plywood from the edge of the granite? thanks Steve

Hi all, Pizza oven and bar are done so now I'm working on the kitchen. It's metal stud with cement board construction. I have granite for the counter top and was planning on using plywood under it as I did with the bar. I'm concerned about the exposed edge of the plywood under the granite near...

I have the same pump. Sometimes I think it's too smart. If the Aqua Logic doesn't connect to the serial control on the pump, the LCD on the pump will have the error message on it. If the serial control is connected I believe the LCD shows "Display Off". The error messages are on page 49 of the...

Hi All, One of my 3 GloBrites has died and unfortunately is about a year out of warranty. I've removed the light from the niche and pulled out the wire pulling a fish back through. The light appears to have a small leak as I can see moisture inside the lens as well as corrosion on some of the...

Hi Jason, Sorry I thought I had. All fixed. Steve

Thanks Jason. That's exactly what I was thinking. Any issues with some water remaining in the panels (pump off), perhaps with the sun on them? Steve

Hi All, I'd like to add solar panels to extend my season a bit. The southern facing side of my house has the smallest roof section, has plumbing vents and is partially shaded by trees. The next best seems to be the west facing side but this requires me to run plumbing up 2 stories, over the...

I read somewhere that the GloBrites have 120 degree beam spread. They are not adjustable like the 5Gs. My preference was multiple light sources rather than one really bright one. That also gives options for multiple colors or swim mode if you wire them individually. Steve

Thanks!

Hmm, My electrician suggested a conduit to protect the bonding wire from the concrete decking to the pool pad. Maybe that's why I can't find any info about the conduit. Steve

Hi all, I have all my bonding around the pool in but I'm wondering how to handle the conduit containing the bonding wire from the pool to the equipment pad. Do I embed the end of the conduit within the concrete and run the bonding wire through it before the concrete is poured? Do I let the...

I don't have any pictures that would show how bright they are at night.