Recent content by rookies

AJW, You are amazing! Thank you soo much!! You saved me $$$. Not sure how my Screen Logic Valve A suddenly got switched from Cleaner to Spillway... I just took pictures how Screen Logic should be configured for future use. Pentair told me how to label these valves, on the Spillway valve...

I do have a spa...going out to take better pics... Thanks

AJW, A the cleaner is off, B cleaner is on...and there is a pipe behind B that goes into the ground to cleaner, pressure cleaner....you cannot see the pipe in picture. Pipe A is labeled Return, correct. Valve 1234 is my Spillway and in the pic (1) is off, when it turns on, the handle points...

Dirk, The third actuator is the Cleaner valve and the one im having issues with..... But, this valve does move automatically when the Spillway is turned on....but it used to not move for Spillway....this leads me to thinking the actuator works and this is a cirtuit board issue....what do you...

Perfect...ty, ill do this and report back after the rain stops!

I wasnt going to touch the little toggle switches, i was just going to unplug the cleaner and the spillway on the board....and change those two...then turn them on and see what the valves do....that sound correct?

Thanks...ill try this in the am!

Hi Jim, It is a Polaris 360, pressure cleaner. If I toggle the cleaner valve, it will rotate immediately, that moves the cleaner and the cleaner will be on all the time.

another layout close up

Jim and AJW, Thank you very much for the help, very much appreciated! I was originally going to replace the auto valve, but since it moves on spillway mode, I thought it may be the circuit board. Then I heard that it still may be the board or the valve....so really not sure.... Cleaner Valve...

Jim, I replaced the 2 micro switches, no luck....are you saying to replace the whole top of the auto valve? or is the actuator a part like the micro switches? Also, the configuration of this valve in question moves when I turn the spillway on...it used to not move...This made me believe it...

Hello, I have a Pentair auto valve that does not move on auto...the motor rpm's ramp up, but no movement on valve. It will move when I manually flip the little toggle switch...This is the valve for the cleaner. I also noticed when the Spillway is on, the cleaner valve opens, which normally...

Thanks!

Jim and MK, thanks for all the help!!! You guys have so much knowledge and thanks for sharing… I added a jumper from J20 to the salt comm port and all is good!!! All my sensors were changed and everything running at correct temps… My screen logic app has the pool temp…is this the correct...