Recent content by PvPMike

So, I had not opened the box. Once I did, and dropped the panel down, I wiggled each wire, and the blue was broken off at some point. Probably immediately after my pool guy closed the box last month. I reinstalled it, and it appears to be working. I'll have to see if it holds our schedules...

Ok. Here are the shots from my SL Config Let me know if this helps. I don't have access to a PC to view this info there.

Hi all, I have a new problem with my pool. The home is a vacation rental, and to reduce the guests issues trying to run the pool system through the Screenlogic app on a tablet, I decided to install an IS4 spaside remote. This is a dual body EasyTouch system (thanks to you wonderful folks...

So I purchased a Kona Labs autofill, and installed it this week while I was at the house. It's amazing. Very happy with the result. We'll see how it performs going forward.

Haha. Short Term Rental.

Hi guys. I'm back again with a weird question on the worst pool build ever. We are in southwest Florida. During the rainy season or overflow is an absolute necessity and helps maintain a consistent level. After going through our first "dry" season through the winter, we've realized that...

I am knocking on wood as I post this, but, problem appears to be solved. For whatever reason the pool and spa now work without interruption after installing the R41 and R42 resistors. I'm frankly shocked. I did not expect this to completely solve the issue. Thank you to all of you who gave...

Ok. Got the board out, took it apart. So, are the R41 and R42 supposed to be soldered together like they are here on the right side

I am back at my house in Florida now, and I just pulled the board down to see where these locations R41 and R42 are on the board, and I can't find them. Am I blind? Is it on the opposite side of the board where it attaches to the interface?

Yeah. The pool build is a complete Crud-show. Everyone I've had out to look at it comments on how they don't even understand how it works. It was the home builder's first go at being his own pool contractor. Hired a regular plumber to plumb it. When we bought the house, the spa wasn't piped...

What does add R41 mean? Is that a part or program or? Thank you for the help, I'm just a little thick on this topic.

So, regardless of any other issues, it makes sense to get the right board in there before assuming there is a different issue.

Ok. Got some photos of this board. My buddy read off ten zillion numbers to me. Keep in mind, I didn't buy any of this. The builder was a whack job and bought all of this before we ever looked at the home. Here's what the board looks like: