Recent content by Pbuckler81

Our house is under contract and the buyers don’t want the pool. So we will be disassembling and reinstalling the pool at our new house. Anyone who has taken down and reinstalled their pool have advice? I put the pool up originally so I understand that part.

You could use paver base / rock dust to fine tune the pavers. It has the fine material in it which is like sand but compactable as it is angular. Sand cannot compact but base for patios will. You can get a bag from most home centers.

I purchased mine from Menards. I see Paver Base by Pavestone available at my Home Depot. They call it Step 1 because it goes down first on compacted soil. If you use it to raise your low spots, I I wouldn’t go thicker than 3” after it’s compacted as the compactor may not compact it fully. But...

Stone dust or base rock with fine material can be compacted as it is angular. Pea gravel cannot be compacted and could wash out easily. Think of compacting a bowl of ball bearings, it cannot be done. I would use stone dust/ base and compact it with a hand tamper or a vibratory plate compactor...

Is there something That will deter honeybees from the area? Their number seem to be increasing by the day. I’d say we could have 8-10 at a time somewhere around the pool. I’ve read somewhere that they’re attracted to the smell of the pool. I don’t know if it matters but, I’ve got a saltwater...

Yes. I couldn’t get Intex to respond to emails and the phone was too busy. So I pasted the PRO (tracking) number into several freight companies tracking field until one produced results. My pool was shipped R+L.

I just assembled mine and there was a black “ L shaped O Ring” that I had to insert into that location. I believe it was loose inside the box but had some tape stuck to it. So maybe it was taped to the pump somewhere when it was packaged. If you look at the manuals posted on the Intex website...

There is a little more to using a water level. After attaching the hose to two objects, place them next to each other and at the same height. Look at the water in the tube, each side should be at the same height in the tube. You can mark the tube somehow and now you know at what height “level”...

I’ve been using a “water level” to help me prep mine. You can find info about them on this forum. I attached a vinyl hose to two jack stands and set them on the pavers. I also added some food coloring to the water. The water in the hose could be considered the water in the pool and how high or...

This may need to be in the SWG forum but since it’s an Intex XTR with the saltwater system I thought here would fit too. We have finally erected the pool and are awaiting the building inspectors approval before filling. Once we start adding water, when should we start adding the salt? Should the...

I’m putting up the same pool and I decided to go with the 4” thick construction blocks side by side. I used a hand tamper to compact the soil beneath them too. I’ve seen other people on here use them. I can’t imagine they would crack.

I’m in the middle of preparing my yard for a pool. I have been using a “water level” to get my pavers level. It’s basically a vinyl hose with water in it that’s been fixed to two objects. You set it on something that you know is level and mark the hose where the water level is. Then move it to...

Thank you for all the replies. We finally figured out what company has it. They called to setup delivery for today!