Recent content by PartyTub

I jumped on a call with their tech support yesterday. Her solution? Move the Spa Command connection from a comm port to the J8 port which is used for the is4 remote. I did that and the remote has no power at all. Obviously wrong. So I called again and got someone different. He confirmed...

Good morning Allen. Ok, I have some new info to share on this whole debacle with the Spa Command remote. We got the system up and running on Friday, pump and all of course. I installed the Spa Command remote in the software with the same results, no water temp reporting and no ability to...

I am running a gas boiler with a heat exchanger. So I'm just using the Fireman's switch.

I will have it up and running tomorrow. I'll let you know what I find out. Again, thank you for your help and feedback.

Allen, I just saw your post. I posted my update without seeing your post. I don't have the pump running or on. I currently have the spa drained so I'm not turning on the pump. When I go into the intellicenter it is reporting a Water temp. I have the heater off as well but I can get the...

Update: I went in and set up a Group and a Circuit with no difference. One thing I am noticings is that when I set up the remote under the Wizard (Or maybe that setting appears under the 'Set Up Remote' setting) and I go in to assign a button on the remote there's a setting I can enable called...

Happy Thanksgiving! Ok, I have some new info. I had another Intellicenter board that I have not used. It's band new still in its original packaging. So, I thought I'd pull it out, swap it out and connect it to the new remote. The new intellicenter and new remote are doing the exact same...

Thank you for all the info Allen. I decided to disconnect the wiring from the intellicenter board and use the new wiring that came with the new remote. I had the same results. I even moved it from Comm port B to Comm port A. No matter what I do and what setting I choose I get the same...

I have the Spa Command, not the is10. I think I only saw the is10 in the Intellicenter software. I need to go back down to the spa and go through the options on installing a remote. I'm guessing there's an option for Spa Command in addition to the is10 option.

Thank you for the info Allen. When I received the new remote I did get the full kit which includes the cable. I was going to try what you suggested. Is there any difference between an is10 remote and a Spa Command? Or are they the same remote? I set up an is10 remote on the Intellicenter...

Hey everyone. We've been having an issue with our Pentair is10 spa side remote which is controlled by the Pentair Intellicenter. After we got everything installed and did the set up programming we noticed that the is10 remote worked but it did not display the water temp or control the water...