Recent content by Kinglangon63

This past week, once my pool heater reaches temperature, the heater cycles on/off numerous times. I changed the thermistors for the pool water and air and same thing. The temperature on my phone app seems to fluctuate 10 Fahrenheit. The temperature outside is now colder at night. What Could be...

i will try to get pics, been raining all day but it's Permacon stone on my wall. It builds up in certain areas. I guess the water splashing from the sheer up against the stone. I also get it on the liner just where the sheers are.

i have this white stuff on my sheer descent wall which I believe is calcium. How can I get it off. I tried power washing it before I removed my cover but no luck.

Light was replaced successfully today and is in sync with the other two. apparently the light that did not sync was an older version light.

James, opened the pool , ran the sheer descent pump at 3000 rpm and oddly enough all 3 sheers seem to be working. sheers just shutdown at 10pm. We'll see what happens tomorrow. In regards to the valves, there is only 1 valve controlling all 3 sheers.

Hi James, I can next weekend when I'm opening my pool, but what else can they control? I don't think I've ever tried adjusting those valves.

Couple of questions, is it possible to replace light with water in the pool or does it have to be drained. i have 3 lights and 1 of them does not sync in with the other 2. I tried to flip the switch on the timer to get them to sync but no luck, what are the options. I just want the light to be...

just checked it , there maybe 3 of 1.5" lines going to the sheers as I have 3 valves where the pool equipment is. I guess i could control the output from there? pump on the left is used for the sheer decents.

Yes there is only 1 pipe of 1.5" going to the sheers. I would have to remove the tops and put them in.

James the picture in my photo shows my design. not sure of the sheer descent mfg, they are about 50'. the two footers are about a foot off the ground and the three footer is about two feet from the ground and all the sheer's are connected together so yes bad design. Would the option of putting 2...

i have 2 pumps on my pool, both Intelliflo connected to Intellitouch. One works off the drains and the other one is for the sheer descents using the skimmer. I have 3 sheer descents and even running the pump at full speed I can barely get the middle sheer to shout water out as my pool builder...